I’ve been writing for a pretty long time; I’ve brought that up before. A problem I always faced as a young writer was lack of focus and commitment. One day I want to write about something—and I’ve got the ideas all up top—but the next day, I’m bored. Maybe not bored with the idea, but bored with writing it. Something else would steal my interest, and I’d move onto that.
It was hard for me to focus on a single project, basically. I start something; I don’t finish it. I did that a lot, if not always. A lot of people have that problem. I know I have that problem, but I thought that I grew out of it a bit.
Seems I haven’t quite ditched the habit. It’s difficult, because while I am able to embark on a project and focus on it, I have so many ideas! I’m working on two novels and one serial. Those are all time-consuming projects. Amidst those things, I need to update this blog more often. I need to sit down and write articles for my job. When I do take the time to work on a personal writing project, I don’t know where to start. I don’t know which project to work on. Then the thought comes to mind that I should start writing something entirely new. A short story, or flash fiction. Something I can submit to places and possibly get published and paid for.
As much as I talk on this blog, and try my best to help people (mostly with their virus problems, as it seems from my 100+ hits a day on my “System-Check” Virus post), I have problems myself. I know I have the skill and ability to do useful things, but more often than not I just don’t know where to direct my figurative blows.
Old habits die hard, and I’ll still have to grapple with them for control. In the meantime, it’s good to take a step back and remember that everyone is always learning. As a writer, you never stop growing, and I’ve only just begun my journey.
If you just sat down to read this and haven’t read part A of this installment yet, please click here. This installment will talk more about how you can use dialogue to augment your writing, while the last part explained how to create strong, believable dialogue.
So how can you use dialogue to your advantage? Dialogue is just dialogue, right? You need it one way or another; it isn’t an extraneous addition. That’s completely true, but that doesn’t mean you’re required to think inside the box. Like anything, dialogue is a tool, and tools are there for you to use in a variety of ways. Before I get into anything fancy, though, I want to bring out one more point that I believe is key to creating quality dialogue.
First off, note that what I’m going to say here isn’t what your writing teacher told you. It isn’t what the “experts” will tell you. In spite of that, I’m right. That sounds more than a little conceited, but I’m deadly serious here, and I’m by far not the only one who holds the same view on this. What am I talking about?
“When writing dialogue attributions, almost always use said.”
It’s likely you’ve heard that before. The argument behind this “staple writing rule” is that said is invisible to the reader, and that using other verbs for dialogue is distracting and useless to your reader. There is merit behind this mindset—I don’t deny that. However, it’s a very robotic way of thinking. How should you look at it? Well that’s up to you, and in the end, your personal writing style is what matters. Let’s dive into this a little deeper.
There are pros and cons behind using only said. I’m not going to draw up a list here, because it’s not that clear-cut. When you use said, it is generally invisible. It’s the simplest attribution there is; it’s telling the reader who just “said” the last chunk of dialogue. There’s nothing wrong with that, however as a writer, you should never overuse a word. It doesn’t matter what that word is—said is subject to that rule just like anything else.
Said is not invisible when you use it too much.
Some might argue against that train of thought, but you can’t argue against what a reader sees when they read your work. I was a reader before I was a writer, and when I read a “well respected” author and saw said used over and over and over… I saw those attributions. It bugged me, and that was back when I was fairly young. It bugs me even more so now. It’s lazy. It’s a cop-out that uses the “expert opinion” as a fallback crutch.
But what if you don’t use said? What if you use screamed, or cried, or whispered? What if you take into account what’s happening in the scene before choosing what attribution to use? There’s nothing exactly wrong with that, however you don’t want to be redundant.
If your story just read … “What’s wrong with you? I know you did it!” Sally accused. … you’ve got a problem.
Why? Because there was no need to tell the reader that Sally was accusing someone of something; she just said “I know you did it!”, so why do you need to state that the dialogue there was an accusation? You don’t, and that’s a prime argument that any writing teacher will give you for the exclusive use of said.
That’s only looking at one side of it, though. It’s perfectly possible to find an attribution in most cases that isn’t redundant, and isn’t spelled s-a-i-d.
If your story just read … “It’s okay, I believe you.” Sally whispered. … do you have a problem?
No, you don’t. If you simply put said in place of whispered there, the true intent of the dialogue wouldn’t have been portrayed. There are a lot of instances where this is true, and sadly that’s something that a lot of teachers completely ignore in their discourse. I argued quite a bit with an instructor of mine about this subject (I can be a bit too difficult for my own good), and after a long discussion, he basically backed down and said that there are many different ways to write.
The fact is, you can indeed distract your reader if you continually force a synonym for said into your dialogue. As with anything, you need a balance. Your writing should flow and incite your reader’s interest, so just the same as using synonyms of said again and again, using said again and again is not going to make your reading flow. Striking that balance between the two can be difficult, but in the end it’s usually pretty apparent what attribution fits each piece of dialogue. If someone asked a question, asked is a perfect attribution. If someone said something in a harsh, quick tone, barked is a workable attribution. If someone just said something… you can still use said. You know your writing better than anyone else, so make a concerted effort to piece your dialogue together correctly.
How can we break this all up though? Well, we of course do not need a “he said/she said” after every spoken phrase. In a two-way conversation, it’s often clear who is saying what after you’ve established who is speaking in turn. This might seem like a very basic principle, but it’s a key component of writing dialogue that is enjoyable to read. Make sure you don’t confuse your reader, though.
What I want to talk about more deeply here is something called a beat. Beats are very simple, but at the same time, when you utilize them correctly, the effect is drastic. Let me illustrate.
“What am I supposed to do?” Tom asked.
“Well I don’t know,” Mary replied. “Have you tried talking to her?”
“Absolutely not! She doesn’t even know I exist, Mary.”
“That’s the problem, silly. It’s up to you to change that!”
There’s nothing wrong with this. In fact, pick up a book off the best seller rack and you’ll likely read a passage of dialogue that is structured just like this. That’s just lovely, but it’s boring. It’s weak. It’s lazy! How can we use beats to make it better?
“What am I supposed to say?” Tom asked.
“Well I don’t know,” Mary shot him a knowing look. “Have you tried talking to her?”
“Absolutely not! She doesn’t even know I exist, Mary.”
She laughed and slugged him in the shoulder. “That’s the problem, silly. It’s up to you to change that!”
See how that works? There’s only one attribution in that exchange. A beat is extremely simple, but it goes a very long way towards livening up your dialogue. The first example was boring, simple, and told you very little about either character. Even though this is an extremely short example of dialogue, in the example above you can at least immediately see Mary’s personality a little. There’s more life in your dialogue when you use beats.
In technical terms, a beat is a sentence of a character’s action, before, after, or in the middle of a line of dialogue that shifts the reader’s focus to that character. It eliminates the need for an attribution, and it gives us a much better image of the scene.
The key is to use balance. Don’t become a mindless drone of the “expert’s” creed. Pull from each practice, mix it up, and make your writing flow. That means you shouldn’t be afraid to use said, synonyms of said, or beats. One thing I will suggest is that you make pretty heavy use of beats. Don’t be stingy with them. It’s much cleaner to the eye to read actions than it is to constantly wade through he saids and she saids, including any synonyms thereof. It might take a little bit more effort, but you should never sacrifice quality for ease of writing. That’s another thing I’ve heard from teachers. “Just use said. It’s invisible to the reader, and it’s easier on you.” Easier on you? I think the silliness behind that idea speaks for itself.
We’ve finally come to the end of this installment of Breathe Life Into Your Writing! I hope you were able to get a good idea of how you personally can create strong, well written dialogue. If you have any questions, feel free to leave a comment.
There will be more to come soon, but in the meantime, be sure to read up on the other parts you might have missed!